Pro E: Top Down Assembly

[Mahesh999]

Hello All,

I hav a doubt,
While doing Top Down Assembly, if we open the part from the
model tree, the three plane are not coming...

Is there other method to get the 3 Planes!!!

Pls, let me know...

 

[kenppy]

did you create the part with the datum planes?

 

[Pupp1286]

Are you using a start part?

 

[SRINIVASANIYER1]

For all you know they must be hidden. Check the model tree
for the three planes. You may also check the Layer tree to
verify whether the layer containing the planes are hidden.