rprice2606
Mechanical
Is there a way to get the bubbles in pro/e to go in order from one sheet to the next. so when the bubble stops at 15 on one sheet the next sub assembly sheet it will pick up at 16.. please help causing major problems at work.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pro-e bubble numbering 2
- Thread starter rprice2606
- Start date
- Status
-
2
- #3
PeterStock
Mechanical
When you repost in the Pro/E forum, please give more information on what you are doing. It sounds as if you are using more than one table with more that one associated assembly.
Peter Stockhausen
Senior Design Analyst (Checker)
Infotech Aerospace Services
Peter Stockhausen
Senior Design Analyst (Checker)
Infotech Aerospace Services
- Status
Similar threads
- Question
- Locked
- Question
- Question
- Locked
- Question