Printing the inserted photo along with the rest of the drawing

[cfee]

I have a photo I've inserted as an underlay, and need it to show up in the plot along with the line-work I added on-top. All in model space. I did this regularly back around ACAD-2004 time frame, but am using 2006 now, and can't remember my setup. Any suggestions?

Tks-
C. Fee

 

[draftsman101]

what layer is the pic on?
check to make sure it is not hidden
check to make sure that the layer has printing turned on

B. Long
P 4 2.80 GHz
2.5 Gig Ram
Solidworks Office 2007 Sp. 2.2

 

[atook]

One issue with combining images and linework, is that the image covers the linework. Send the image to back using Tools->Draw Order -> Send to Back. click on the image, and it will drop to the bottom, showing any linework above it. Another quick trick I use is to select all the linework using a crossing window, but not the image, then move it from the endpoint of a line to the same point (not moving it at all) this causes Autocad to redraw that linework on top of the image.

Hope that helps.

 

[cvg]

turn on image transparency and lines will show through