Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Printing Drawings

Status
Not open for further replies.

sourcec0d3

Automotive
Joined
Aug 2, 2011
Messages
37
Location
US
Hello all,
Need a little help with printing drawings. It seems every time I try to print one of my drawings with an excel sheet inserted into it the Catia session terminates unexpectedly. Anybody aware of this and what might fix it? Is it have anything to do with how I'm inserting it? I'm not leaving it linked to an external file when inserting it. It doesn't seem to be consistent though. Sometimes I'm able to print it and sometimes not. What gives?

TY
D Reno
 
If CATDUAV5 can't fix this error, you can try to save as PDF file and then print the PDF.

Regards
Fernando
 
Fernando,

Yea that's how I ended up printing it yesterday. What's weird is the fact that right after printing to pdf file I went right back and printed it again and although it generated the pdf just fine just a single step prior to that it still terminated when attempting to print it. If I remove the excel sheet from the drawing it prints every time just fine. I've checked to make sure the print drivers are up to date which they are and also the problem reproduces itself on two different machines at exactly the same point (after hitting ok from the 'print' dialog box).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top