Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Primary air handling unit

Status
Not open for further replies.

razaeleabgap

Mechanical
Joined
May 8, 2012
Messages
1
Location
MY
Hi everyone im in need of all you advice can any one tell me when and why do we need to treat fresh air (pahu) and at what temperature do i have to supply the air to the ahu
 
I dont think youll get a decent answer with such a vague question, but Ill put $20 on 55.

knowledge is power
 
Sometimes you have 100% fresh air installations. In this case you have to treat it otherwise the temperature and humidity will be out of range.

There are other cases in wich you may want to treat fresh air with a dedicated unit so the indoor units or other air handling units be designed only to handle room loads.

best regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top