Jun 17, 2010 #1 arh13p Agricultural Joined Mar 25, 2009 Messages 32 Location US Where can I find the correct procedures/specifications for pressure testing a pipeline with the water method for leak detection? Thanks
Where can I find the correct procedures/specifications for pressure testing a pipeline with the water method for leak detection? Thanks
Jun 17, 2010 #2 Zambo Civil/Environmental Joined Jun 5, 2003 Messages 697 Location SG what liquid (or gas) is the pipe to carry? material of pipe? pressure rating? diameter of pipe (or range of diameters)? Upvote 0 Downvote
what liquid (or gas) is the pipe to carry? material of pipe? pressure rating? diameter of pipe (or range of diameters)?
Jun 18, 2010 Thread starter #3 arh13p Agricultural Joined Mar 25, 2009 Messages 32 Location US The pipes are used on farms to pump liquid animal waste. Pipes are typcially PVC SDR 26 and 21, SCH 40 or 80 so you are looking at up to 200 psi pressure rating. Upvote 0 Downvote
The pipes are used on farms to pump liquid animal waste. Pipes are typcially PVC SDR 26 and 21, SCH 40 or 80 so you are looking at up to 200 psi pressure rating.
Jun 18, 2010 #4 rconner Civil/Environmental Joined Mar 18, 2005 Messages 1,733 Location US [see also end of thread discussion several days ago at http://eng-tips.com/viewthread.cfm?qid=271691&page=1] Upvote 0 Downvote
[see also end of thread discussion several days ago at http://eng-tips.com/viewthread.cfm?qid=271691&page=1]
Jun 18, 2010 Thread starter #5 arh13p Agricultural Joined Mar 25, 2009 Messages 32 Location US Thanks,that thread was very imformative! Upvote 0 Downvote
Jun 30, 2010 #6 cj5 Civil/Environmental Joined Jun 30, 2010 Messages 3 Location US Try a search for AWWA pressure testing, you should find what you're looking for. Upvote 0 Downvote