Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pressure test using nitrogen 1

Status
Not open for further replies.
Mecha20

Mecha20

Mechanical
Joined
Feb 1, 2008
Messages
18
Location
TT
Can anyone tell me how nitrogen i would need to pressure test a (diameter) 5" pipe, 150ft long. Test pressure 250 psi.
Just need a confirmation...

Thank you.
 
Sort by date Sort by votes
You do know what the stored energy in this is, right?
This is how people get killed. Be very careful.

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
 
Upvote 0 Downvote
What are you looking for...a drop in pressure? That's one big pipe...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jzeds
  • Locked
  • Question Question
ASTM tests performed using hydraulic press
Replies
1
Views
1K
TigerGuy
TigerGuy
Muhammad Ijaz
  • Locked
  • Question Question
Hydrostatic test of tubes
Replies
1
Views
841
EdStainless
EdStainless
Muza33
  • Locked
  • Question Question
heating rate applicable for normalisation of Dish end for pressure vessel
Replies
0
Views
740
Muza33
Muza33
gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation & unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz

Part and Inventory Search

Sponsor

Back
Top