Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure distribution

Status
Not open for further replies.
sarvid

sarvid

Mechanical
Joined
Jul 18, 2003
Messages
2
Location
SE
Hi,

I have an axisymmetric model, on which there is supposed to be an even distribution of pressure/force over the area of the axisymmetric model.

So far I have used the sfl command, but it distibutes the pressure evenly on a LINE, which means that the pressure/force is denser in the middle of my axisymmetric model.

I would really appreciate some help on this!
Thank you,
Sofia
 
Status
Not open for further replies.

Similar threads

Gintoki_Satoru
  • Locked
  • Question Question
Temperature distribution for tapping process
Replies
0
Views
487
Gintoki_Satoru
Gintoki_Satoru
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
Anatoly_k
  • Locked
  • Question Question
Pipe Burst Pressure - elastic-plastic analysis strange asymmetry
Replies
0
Views
913
Anatoly_k
Anatoly_k
RoberCR
  • Locked
  • Question Question
How can I use a variable acceleration to define a hydrostatic pressure inside a tank in ANSYS WB?
Replies
2
Views
435
RoberCR
RoberCR
HilaryE
  • Locked
  • Question Question
Porous zone - setup of lab air tunnel - velocity v's pressure drop
Replies
0
Views
203
HilaryE
HilaryE

Part and Inventory Search

Sponsor

Back
Top