Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRE INSULATION EN STANDARD FOR DN 1600 mm Pipes?

Status
Not open for further replies.
CREERAAM

CREERAAM

Mechanical
Joined
Feb 23, 2015
Messages
109
Location
IN
Hai,


EN 253 Pre insulated pipe Standard refered for tolerances and test details. But there the test details and inspection details upto DN 1200 mm Only. For sizes above DN 1200 mm Which standard we have to refer?


I would like to know details to inspect and provide the tolerances and inspection reports for client inspection.

REGARDS,

G.SRIRAM.

Dream,Dream,Dream Dream transforms in to thoughts.And thoughts result in action
 
Status
Not open for further replies.

Similar threads

K
  • Locked
  • Question Question
DN 165
Replies
4
Views
3K
KevinNZ
KevinNZ
B
  • Question Question
Pressure Limits of Ductile Iron Pipes
Replies
2
Views
646
bimr
bimr
Nejim
  • Locked
  • Question Question
Thermowell for small size pipes
Replies
7
Views
3K
hacksaw
hacksaw
Asisraja D
  • Locked
  • Question Question
Need review for pipe wall thickness calculation sheet for pipes under internal pressure
2
Replies
27
Views
4K
Asisraja D
Asisraja D
N
  • Question Question
ASME B16.9 fittings in EN-13480 design code
Replies
7
Views
1K
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top