Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PP Instruction ( Manufacturing)
- Thread starter 135791
- Start date
13910634301
Aerospace
As I know , in every workbench of machining , there is a icon called "Post-Processor Instruction", What you should do is click htis icon and then click the program's name on the Specification Tree , a dialog box will pop up , then you can enter your PP Words.
Also there are some samples of Post Processor Word Table.Right Click the Operation on the Specification Tree ,edit it, select Machine, you would see the dialog box and the Post Processor Word Table just in it , you select what you want.
Also there are some samples of Post Processor Word Table.Right Click the Operation on the Specification Tree ,edit it, select Machine, you would see the dialog box and the Post Processor Word Table just in it , you select what you want.
- Status
Similar threads
- Locked
- Question