Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

post help

  • Thread starter Thread starter denran
  • Start date Start date
D

denran

Guest
Does anyone have a post processor for Mazak Quick Turn Nexus 200-II you might be willing to share. It is a 4th axis with live tooling. Using UG Version 7.5 but anything would get me started in the right direction. Thanks in advance.
Dennis
 
You must log in or register to reply here.

Similar threads

S
  • Question Question
Define POST-Actions for Loading from different options
Replies
0
Views
1K
sbjw
S
N
  • Question Question
Through curves command // Blade help
Replies
0
Views
368
Nutria360
N
D
  • Locked
NX Help
Replies
2
Views
3K
Toost
Toost
AlexCLE
  • Locked
  • Question Question
Post builder change full circles to shorter arcs
Replies
0
Views
1K
AlexCLE
AlexCLE
jrhagen
  • Locked
  • Question Question
Need help decoding meaning of error codes
Replies
4
Views
3K
jrhagen
jrhagen

Part and Inventory Search

Sponsor

Back
Top