Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Post builder tool offset number

Status
Not open for further replies.
Proizvodnja

Proizvodnja

Mechanical
Joined
Jul 2, 2014
Messages
44
Location
BA
How to change tool without offset number, and in the first rapid move call for that offset.

N5 G90 G71 G95
N10 M03 S600 M39
N15 T0100
N20 G59 Z0
N25 G00 X500 Z200 T0101
 
Status
Not open for further replies.

Similar threads

AlexCLE
  • Locked
  • Question Question
Post builder change full circles to shorter arcs
Replies
0
Views
1K
AlexCLE
AlexCLE
E
  • Question Question
Offset Surface looks crumpled
Replies
2
Views
3K
Emer4ld
E
E
  • Question Question
Direction of an Offset Curve
Replies
0
Views
1K
ErkiPerki
E
nxexplorer
  • Locked
  • Question Question
NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Replies
0
Views
313
nxexplorer
nxexplorer
Cmesserli
  • Locked
  • Question Question
NX 2212 Library Reference Number/ Catalog Number
Replies
3
Views
581
Anton Liubimov
Anton Liubimov

Part and Inventory Search

Sponsor

Back
Top