Post builder Heidenhain code

[Proizvodnja]

In line 31 there is no output of the position of the circle center even though there is force output for CC in the post builder.

16 CC X150.438 Y-209.8
17 C X107.808 Y-202.802 DR-
18 L X108.07 Y-201.207 F250.
19 L X53.303 Y3.186 F250.
20 L X46.059 Y1.244 F250.
21 L X75.037 Y9.009 FMAX
22 L Z21.
23 L Z20.
24 L Z-2. F250.
25 L X46.059 Y1.244 F250.
26 L X.177 Y-11.049 F250.
27 L X81.705 Y-315.316 F250.
28 L X166.997 Y-292.462 F250.
29 L X156.416 Y-252.973 F250.
30 L X150.634 Y-253. F250.
31 CC
32 C X107.808 Y-202.802 DR-

 

[shags72]

Areyou using MOM_force_block? Try that. Looks like a full circle back to start of x and y.

 

[Proizvodnja]

Thanks for the reply.

How to set MOM_force_block condition?

 

[shags72]

The retract_motion_y is your block template title. This forces all words that are in the template.


MOM_force_block once retract_motion_y