Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Positioning Text Along a Curve 1

Status
Not open for further replies.

battlehands

Electrical
Joined
Apr 12, 2011
Messages
19
Location
US
When using a curve to position text, how can the text be positioned specifically along the curve?

TIA - battle
 
I don't understand your solution. Could you reword it?
 
If you're asking exactly where along the sketch curve the text is positioned, then you have to adjust your sketch segment accordingly. The sketch text will start at the beginning of the segment. If that isn't what you are asking then maybe you should reword your question.

Dan

Dan's Blog
 
battle, in a sketch draw the curve with lines, arcs or splines. If there are multiple segments select all of them first. Then type the text and position with the aligning tools - right, middle, left, full justify, flip, etc. Edit or dimension the segments to precisely locate the text.

Diego
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top