Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pontoon Fabrication

Status
Not open for further replies.

mal123

Marine/Ocean
Nov 14, 2002
1
IN
Sir,
I have to fabricate a Pontoon to transport the anchor from one location to another.
The Pontoon is to be fabricated with the help of 1.5 m dia liner (Steel Pipes) and ISMB 300 on top of it. The self weight of the pontoon is roughly 26 MT and the pontoon will have a fairlead and a winch on it to handle the anchor.a person is required to stand on it so roughly it will carry the additional weight of 3 MT.
The size of the pontoon is 6.5 x 9 m.
Kindly give the information @ the Buoyancy calculation.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top