Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pond outlet control

Status
Not open for further replies.

Wood2coal

Civil/Environmental
Joined
Sep 19, 2001
Messages
7
Location
US
Anyone know any good outlet control systems (besides pumps)for detention ponds. I'm designing a storm sewer and I have a developer next door that wants to dump an 85 cfs into the trunkline.
 
Sure. Make sure his discharge is small enough to limit the additional flow to the value you desire or can reasonably accommodate. He'll holler - after all, the larger his discharge the smaller his pond! Just be sure that you can defend your design -

[pacman]

Please see FAQ731-376 for great suggestions on how to make the best use of Eng-Tips Fora.
 
orifice plate on the outlet pipe is a good way. size it so that the maximum 85 cfs is achieved with headwater at the top of the pond.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top