I have a subwoofer, Infinity Reference 1230w, and the Polypropylene cone has separated from the Butyl Rubber Surround. Is there an inexpensive adhesive suitable for this bonding the two back together? I really have no idea where to look for this kind of thing, and I really wouldn't trust anyone at a hardware store. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polypropylene and Butyl Rubber?
- Thread starter gp13
- Start date
Stickwithme
Materials
This is very easy to accomplish with the use of a polyolefin primer which will raise the surface energy of the polypropylene but only for a window of time---usually 20 minutes.
- Status
Similar threads
- Locked
- Question