Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Polyamide 6 or polyamide 12 for fuel lines

Status
Not open for further replies.
pardal

pardal

Automotive
Joined
Oct 17, 2001
Messages
444
Location
AR
Hi all .

Could I get some info , pros and con about using POLYAMIDE 6 or POLYAMIDE 12 tubing for gasoline or diesel fuel system.

Thanks in advance.


Pardal
Pardal
 
Status
Not open for further replies.

Similar threads

bcavender
  • Locked
  • Question Question
What polymer is this (or anything close)?
Replies
4
Views
4K
bcavender
bcavender
703george
  • Locked
  • Question Question
Anti Static requirement for a non-metallic bushing
Replies
2
Views
5K
TugboatEng
TugboatEng
1
  • Locked
  • Question Question
What is the best nylon/polymer filament for a foldable platonic solid with living hinges?
Replies
8
Views
10K
btrueblood
btrueblood
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded / Extruded Hytrel
Replies
0
Views
917
Buckshott00
Buckshott00
Tymon
  • Locked
  • Question Question
Most suitable laminating adhesive film for TPU lamination
Replies
0
Views
441
Tymon
Tymon

Part and Inventory Search

Sponsor

Back
Top