Destructotron
Materials
We are using a surface treatment system in which the end result is the polarization of the surface of PP and other TPO materials. Is there a way to show visually that the surface is now polar?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polarity testing.
- Thread starter Destructotron
- Start date
- Status
EdStainless
Materials
Measure the wetting of the surface by different fluids, polar and non-polar, before and after. The polar fluids should have a change in the angle of conact and the non-polar shouldn't.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
- Status
Similar threads