Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Point at two lines intersection 3

Status
Not open for further replies.
CAD2015

CAD2015

Automotive
Joined
Jan 21, 2006
Messages
2,079
Location
US
Hi,

It may look childlike, but I'm still asking this question:
How could I create a point at the intersection of the two edges (highlighted in the picture)?

image_thjilv.png


I haven't found this option under point creation, either in Part Design and GSD.........

CAD 2015
 
Sort by date Sort by votes
Hello, maybe like this?
Capture1_ufw6rn.png


[link catiavbmacro.com]catiavbmacro.com[/url]
 
Upvote 0 Downvote
Any other opinion/options?........
[bigsmile]

CAD 2015
 
Upvote 0 Downvote
try using intersection with Extend option selected.
191030_Image008_vnayv7.jpg
 
Upvote 0 Downvote
Thanks RickyT!
[2thumbsup]

CAD 2015
 
Upvote 0 Downvote
RickyT:
Your option is perfect!
Fast and efficient!
Thanks a lot!
image_q5en48.png


CAD 2015
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Question Question
Problem when creating a function from two splines
Replies
0
Views
223
r1xn
R
U
  • Locked
  • Question Question
Point on curve on min curvature radius
Replies
4
Views
2K
ulitsakalarash
U
Jegsaran
  • Locked
  • Question Question
Read point coordinates in CATIA using python
Replies
1
Views
1K
LWolf
LWolf
rookiezzz
  • Locked
  • Question Question
Return the nearnest surface and edge from body against point
Replies
2
Views
2K
rookiezzz
rookiezzz
DiaeArrahmane
  • Locked
  • Question Question
CATIA MACRO: create a new point from a reference point
Replies
2
Views
640
DiaeArrahmane
DiaeArrahmane

Part and Inventory Search

Sponsor

Back
Top