Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pneumatic target inserter
- Thread starter kluschk
- Start date
athomas236
Mechanical
I have been involved in a few steam blows in my time but have never seen a pneumatic inserter. Looking forward to the responses.
Regards,
athomas236
Regards,
athomas236
- Thread starter
- #3
Hi athomas236
this is quite common practice here in europe. Companies like Siemens and Alstom are using this type of inserter. On a piston they connect a metal bar. Also they are using a ball valve or a gate valve. When they like to insert the target into de steam line they open the valve and with the pisten they are moving the target into the steam line. This system only works with continous steam blowing.
Regards
this is quite common practice here in europe. Companies like Siemens and Alstom are using this type of inserter. On a piston they connect a metal bar. Also they are using a ball valve or a gate valve. When they like to insert the target into de steam line they open the valve and with the pisten they are moving the target into the steam line. This system only works with continous steam blowing.
Regards
- Status