Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PMI on Already hot dip galvanized stud and nut
- Thread starter erjainesh
- Start date
EdStainless
Materials
Unless you want to strip the galv from spots to test you had better do the testing before.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
maxdistortion
Mechanical
I think you can do it but you have to scratch the galv coating off. Why do you need to PMI bolts? Are they structual bolts or pipe studs?
- Status
Similar threads
- Locked
- Question