TufailShams
Mechanical
I'm trying to mentioned Linear Dimensions to my model, but somehow it comes out awkward. Sorry, I'm in the learning stage. Here is the image.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PMI DIMENSION IN NX9
- Thread starter TufailShams
- Start date
- Status
JohnRBaker
Mechanical
When adding PMI Dimensions to a 3D view of your model, you must define the Plane that the Dimension will be created in.
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
- Status
