Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Plug Valve for Low Temperature
- Thread starter sys8888
- Start date
Take a look at FLowserve Nordstrom plug valves
sys8888
No offense meant.
If you do not normally purchase valves for your company, might I suggest you talk to the person (probably someone in I&C) who normally does.
There are many valve manufacturers out there, and most are good. But that is not the point. Chances are, your plant already has a type of low temp plug valve that they "standardise" on, or have in place a SOC (supplier of choice) where they get discounts. The valve you describe is nothing extraordinary. It should be easily obtainable.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
No offense meant.
If you do not normally purchase valves for your company, might I suggest you talk to the person (probably someone in I&C) who normally does.
There are many valve manufacturers out there, and most are good. But that is not the point. Chances are, your plant already has a type of low temp plug valve that they "standardise" on, or have in place a SOC (supplier of choice) where they get discounts. The valve you describe is nothing extraordinary. It should be easily obtainable.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
- Status
Similar threads
- Locked
- Question