Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plian Welded Steel Wire Mesh - Standards

Status
Not open for further replies.

ajk1

Structural
Apr 22, 2011
1,791
Our old master specification for plain (un-deformed) welded steel wire mesh (like 6x6 6/6 etc. ) referenced CSA Standards G30.3 and G30.5. but those standards have been discontinued by CSA quite some time ago (although I understand that they can still be purchased from CSA). CSA at the time they were discontinued, said to replace them with ASTM A82 and A185. But on checking the ASTM web site, it says that these standards are superseded.

Question:

What standard(s) should we specify for plain welded steel wire mesh?
 
Replies continue below

Recommended for you

sorry for the typo in the header...it should say "plain"
 
ASTM A1064 replaced the old plain and deformed wire and welded wire specifications.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor