Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Please help, I bet it is easy for you

Status
Not open for further replies.

Jurinho0

Mechanical
Oct 19, 2012
1
I dont know how to create a sketch in way that will allow to change dimentions without destroying whole sketch. For example we want to change dimention R15 to R150 and the back to R15 and the main goal is not to destroy sketch, It has to look like before changes. Maybe I should use some block options, I dont know, Please help me because Im just starting my work with this software.
Great thanks for all answers
 
Replies continue below

Recommended for you

Sounds like you need to find out how to fully constrain your sketch with relationships not just a few linear dimensions.

There are tools in SE to help you see when sketch is fully constrained.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor