Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PLC 5/20 Program Copy

Status
Not open for further replies.
yhprums

yhprums

Petroleum
Joined
Nov 28, 2005
Messages
3
Location
US
I need to go to a clients site and copy a program to reverse engineer and create a shutdown key. Can I take a copy of the program while the processor is running without interupting it?
 
Sort by date Sort by votes
Yes if the program is not password protected.
 
Upvote 0 Downvote
Yes, however unless you have original program you will not get any comments or descriptions from an upload.
 
Upvote 0 Downvote
yea on plc5 if its password protected just type in ABUNLOCK works everytime
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

KGisME
  • Locked
  • Question Question
Help a non-PLC guy with this control application
Replies
14
Views
5K
KGisME
KGisME
HydroBuff
  • Locked
  • Question Question
Remote PLC Updates and Diagnostics Via Ethernet
Replies
0
Views
934
HydroBuff
HydroBuff
506818
  • Locked
  • Question Question
Multiple PID Loops (PLC)
Replies
3
Views
1K
xnuke
xnuke
cames
  • Locked
  • Question Question
PLC Control for small lab setup automation help
Replies
5
Views
2K
3DDave
3DDave
SA07
  • Locked
  • Question Question
Can we operate Emerson Scada system/Server with Siemens PLC 400 ?
Replies
1
Views
1K
thermionic1
thermionic1

Part and Inventory Search

Sponsor

Back
Top