Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plating uniformity: usage of shields, robbers or thieves.

Status
Not open for further replies.
Steved

Steved

Industrial
Joined
Aug 25, 1999
Messages
32
Location
US
Hello:

I am trying to find some articles that reference the usage of shields, robbers and thieves. These would be utilized in the electroplating/electroforming of nickel in an effort to improve the deposit uniformity. I would appreciate the address of any sites that have this information. Thank you for your time.

Steved [sig][/sig]
 
Status
Not open for further replies.

Similar threads

M
  • Locked
Surface Plating
Replies
2
Views
2K
MintJulep
M
J
  • Locked
Need to paint carbon steel wire with fluorescent coating, either enamel, acrylic or other. What would be the best primer to use?
Replies
0
Views
763
Jon Davidson
J
zaim1996
  • Locked
  • Question Question
How to calculate the equilibrium of dilution tank ?
Replies
1
Views
715
bimr
bimr
Alex07
  • Locked
  • Question Question
Opinion of geomembranes?
Replies
2
Views
613
bimr
bimr
dreamstar12
  • Locked
  • Question Question
How to monitor and control partial pressure of water vapor in nitrogen gas?
Replies
0
Views
453
dreamstar12
dreamstar12

Part and Inventory Search

Sponsor

Back
Top