Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plate Exhangers and ASME Code

Status
Not open for further replies.
MLGR

MLGR

Electrical
Joined
Feb 25, 2003
Messages
2
Location
PR
Hi!
I need to know if there is an ASME code for plate heat exchangers and if there is one what are the requirements for pressure and temperatures.

Thanks for the help!
 
Sort by date Sort by votes
Commonly, the pressure design code and structural welding code for plate heat exchanger shall be specified or agreed by the purchaser. For example, they might be ASME VIII, Div. 1, for general service, or should conform to ASME, Section VIII Div.2 for the fatigue design under cyclic service condition.
 
Upvote 0 Downvote
ASME SEC VIII can be used for Plate type Exchanger.

Industries (Outside US) generally refer to SPVC(Swedish Pressure Vessel Code)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Khalid Hameed
  • Locked
  • Question Question
ASME B 31.3 and ASME B31.8
Replies
4
Views
2K
Khalid Hameed
Khalid Hameed
hugo50ml
  • Locked
  • Question Question
Concerns Regarding ASME Certification and Company Conduct
Replies
0
Views
2K
hugo50ml
hugo50ml
Samingme755
  • Locked
  • Question Question
Asme B16.47 series A and B
Replies
1
Views
3K
LittleInch
LittleInch
WRH_36
  • Locked
  • Question Question
Code 2843 (ASME BPVC.CC.BPV.S4), transient problem
Replies
3
Views
852
TGS4
TGS4
Karik87
  • Question Question
Combine thickness and diameter qualified range of welder according to ASME IX
Replies
4
Views
972
Karik87
Karik87

Part and Inventory Search

Sponsor

Back
Top