Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plate and Fin Heat exchanger modelling in DWSIM

Status
Not open for further replies.
Phani Y

Phani Y

Chemical
Joined
Aug 3, 2019
Messages
39
Location
IN
Hi All,

I want to model Plate and Fin Heat exchanger in DWSIM, where one hot fluid is exchanging heat simultaneously with two cold fluids. But, that heat exchanger is not readily available in the palette. So, how do I do this? Please elaborate your answer, preferably with some reference links.
 
Status
Not open for further replies.

Similar threads

Iomcube
  • Locked
  • Question Question
Heat of Dilution for H2SO4
Replies
7
Views
2K
horacio Torres
horacio Torres
ReemaK
  • Locked
  • Question Question
h2s scrubbing from a mixture of h2s and nh3
Replies
10
Views
2K
ReemaK
ReemaK
seagal3232
  • Locked
  • Question Question
What's the best way to dissolve CO2 in water in a continuous process at low pressure?
Replies
11
Views
2K
bimr
bimr
Phani Y
  • Locked
  • Question Question
Toluene Methanol Alkylation simulation in DWSIM
Replies
0
Views
202
Phani Y
Phani Y
shvet
  • Locked
  • Question Question
Process and reactors scaling
Replies
3
Views
1K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top