Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Plane 25 element Code for Non Axis Symmetric Loading

Status
Not open for further replies.
Mohit_singh

Mohit_singh

Mechanical
Joined
May 24, 2019
Messages
24
Location
IN
Hi All
I am dealing with a axis symmetric 2D Model with Non Axis Symmetric Bending. Can Someone write an example APDL code or give me reference in which -
The Boundary Conditions are defined
The Non Asymmetric Loads are Defined
The Angular Deformations plots are Extracted.
Thanks in advance
 
Status
Not open for further replies.

Similar threads

YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
aaronsmith0402
  • Locked
  • Question Question
Von Mises beyond Yield, is it valid for Ultimate loading - Part 3
Replies
7
Views
2K
rb1957
rb1957
Joel_Lapointe
  • Locked
  • Question Question
Get fatigue the notch factor for non standard geometry?
Replies
2
Views
464
rb1957
rb1957
hammads23
  • Locked
  • Question Question
Non linear pot ptfe bearing
Replies
0
Views
387
hammads23
hammads23
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
370
Kamyar_K
Kamyar_K

Part and Inventory Search

Sponsor

Back
Top