Piping

[leumas10]

Hi everybody

i use pro-e wildfire 2.0 for solid modelling & sheet metal too. But i also watch Piping option in it.


So can anybody give me the basic tips abt. it?

i.ehow to used & where it is necesary etc.

 

[fork_sk]

If you are having a foundation Pro/E liscence you will not get Piping with it. however if you do have the required liscense then you need to do the following thing to use Pipint . Go to TOOLT --> Floating Module --> Routed_System_Set then you will have the piping liscense.


I hope this helps....

 

[Brian_Adkins]

Question closed...


Please repost, if desired considering the following:


1. Please post in an appropriate forum such as "modeling" or "Routed Systems" and not in the Analysis forum.


2. Please include some form of your question in the topic title. The word "piping" is not sufficient.