Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PIPESIM or PIPEFLOW

Status
Not open for further replies.
InTheMoney

InTheMoney

Petroleum
Joined
Dec 29, 2004
Messages
6
Location
CA
Any experiences out there on which is the better or preferred pipeline simulation software?

Looking at application for typical oil field development, 3 phase flow.

Something that is user friendly and relatively accurate.

Also, contact details of any retailers.

Thanks

ITM
 
Status
Not open for further replies.

Similar threads

Samingme755
  • Question Question
Repairs or Additions after Pressure Test
Replies
3
Views
3K
goutam_freelance
goutam_freelance
jafary64
  • Question Question
Hot Dip or Cold Galvanized for Stud bolt in Piping
Replies
15
Views
9K
EngrPaper
EngrPaper
K
  • Locked
  • Question Question
reinforcing pads as per 13480 or sockolets?
Replies
8
Views
4K
kongsin_CYMRU
K
S
  • Question Question
Pipe wall thickness calculation method for t≥D/6 or for P/SE>0.385
Replies
5
Views
13K
goutam_freelance
goutam_freelance
3
  • Locked
  • Question Question
Need Advise Selecting 1" or 2" Domestic Water Connection
Replies
8
Views
10K
306ARayT
3

Part and Inventory Search

Sponsor

Back
Top