Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pipeline Restoration

Status
Not open for further replies.

LuizSouza

Mechanical
Dec 5, 2001
66
Hi,
I'd to know some experience in restoring cement linning in 8" and 15' OD pipeline on-site(without unburied it) with 3Km (1.86 miles) between manholes.
Thanks
 
Replies continue below

Recommended for you

That is a tough assignment. The lines are too small to get into, so you would need a remote control injection mould device.

Can you put a Polyethylene Pipe inside as a lining? You will need to excavate some temporary manholes for the work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor