Anyone have experience with flow equations for natural gas in a circular pipe flowing around an innerduct (annular flow). Want pressure drop for given flowrate with initial pressure of 10 to 60 psig. Pipe is 1 to 6" IPS plastic, cast iron or steel. Innerduct is plastic 1/8" to 1" CTS.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pipeline flow modelling/analysis
- Thread starter sloquick
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
