Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pipe weld callout

Status
Not open for further replies.
vscid

vscid

Nuclear
Joined
Aug 5, 2007
Messages
65
Location
US
What would be the best callout to weld the pipe to the triangular piece?
pipe: 300 series stainless, 1.25 OD, 1.125 ID,
trinagular plate: 300 series stainless, 0.25 thick.
Thanks!
 
Sort by date Sort by votes
Do you mean

"What is the proper call-out for the parts shown, with no further joint preparation?"

or

"What would be the best joint for welding these two things together?"

If the former, I think it's a flare-bevel. If the later, much more information is needed.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MToomey
  • Question Question
Weld Callout Leader Direction
Replies
5
Views
8K
MToomey
MToomey
sdra2
  • Question Question
Weld assessment for lifting beam
Replies
0
Views
3K
sdra2
sdra2
D
  • Locked
  • Question Question
Butt weld end preparation between clad and no clad pipe
Replies
3
Views
1K
Dr. Drew
D
Cormet
  • Question Question
Dissimilar Metal Weld Qualification
Replies
5
Views
2K
David3399
D
DavidLove
  • Question Question
Checking inclusion content of weld filler material
Replies
3
Views
10K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top