Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipe support design 1
- Thread starter LFab
- Start date
-
1
- #2
Lfab,
Yes, there are codes, and they govern the acceptable design, construction inspection and testing of piping system and pipe supports....
For heavy industrial piping, the codes are ASME B31.1 and ASME B31.3. You can purchase them at
Within these codes you can find acceptable pipe support spans, information on support types, welded attachments etc.... You will also find reference to the MSS series (MSS-69 and -89 come to mind) of standards that control the design and application of pipe support hardware.
Try
MJC
Yes, there are codes, and they govern the acceptable design, construction inspection and testing of piping system and pipe supports....
For heavy industrial piping, the codes are ASME B31.1 and ASME B31.3. You can purchase them at
Within these codes you can find acceptable pipe support spans, information on support types, welded attachments etc.... You will also find reference to the MSS series (MSS-69 and -89 come to mind) of standards that control the design and application of pipe support hardware.
Try
MJC
- Status
Similar threads
- Locked
- Question
- Question
