Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pipe Designation C313
- Thread starter Carburize
- Start date
NozzleTwister
Mechanical
What's the Material?
Possibly intended to be ASME B31.3, Process Piping.
NozzleTwister
Houston, Texas
Possibly intended to be ASME B31.3, Process Piping.
NozzleTwister
Houston, Texas
uhmm? There apparently was a C313-78 standard (now withdrawn) from ASTM, "Method of Test for Adherence of Porcelain Enamel and Ceramic Coatings to Sheet Metal". As far as pipe, only thing I can think of very close is AWWA C303 (for bar-wrapped, formerly "pretensioned", concrete pipe).
- Thread starter
- #4
NozzleTwister
Mechanical
Carburize,
"C313" certainly isn't a normally recognized standard in the piping community of the U.S.
Depending on the source of your specification, it might be a reference to a separate client or licensor specification. If not, my money's on it being a typo for "B31.3"
Good luck and keep us informed.
NozzleTwister
Houston, Texas
"C313" certainly isn't a normally recognized standard in the piping community of the U.S.
Depending on the source of your specification, it might be a reference to a separate client or licensor specification. If not, my money's on it being a typo for "B31.3"
Good luck and keep us informed.
NozzleTwister
Houston, Texas
- Status
Similar threads
- Question
- Question
