Pipe description

[xnabrar]

Hy all,

^{I am stuck in the below description and want to understand below basic description.}

PIPE, CS API 5L-X65M-PSL2, SAW, STRT SM, BE,

pipe: pipe

cs: carbon steel

API 5L-X65M: STANDER WITH GARDE
SAW: WELDING TYPE
BE : BEVEL END

STRT SM: What is the exact meaning of this?



thanks

 

[LittleInch]

Straight seam?

As opposed to spiral wound?

I've had a good look through API 5L and can't find any such abbreviations.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[xnabrar]

I talk with designer,this is a straight seam.

 

[LittleInch]

Good - that one's sorted.

A bit odd as that's what you would normally expect...

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[SJones]

Could have just used “SAWL” and taken a few less characters

Steve Jones
Corrosion Management Consultant

http://www.linkedin.com/in/drstevejones

All answers are personal opinions only and are in no way connected with any employer.

 

[LittleInch]

I'm not sure I ever realised what the "L" stood for (L= Longitudinal, H = Helical or spiral)...

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.