Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pin Loaded Holes
- Thread starter trallee
- Start date
- Thread starter
- #3
ESDU (Engineering Sciences Data Unit) is an international organization which provides validated engineering design data, methods and software for the engineer.
You can find contact addresses and telephone numbers on their web site:
Hope this is helpful.
You can find contact addresses and telephone numbers on their web site:
Hope this is helpful.
Guest
AISC presents some lug design criteria in both the LRFD book (Load and Resistance Factor Design) and ASD (Allowable Stress Design). These books are readily available and most civil engineers and a significant number of mechanicals that are involved in any structural design will have it. In ASD, 9th edition it is located in Chapter D, page 5-40 to 5-41.
Good Luck
Good Luck
- Status
Similar threads
- Locked
- Question