Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pile spec.

Status
Not open for further replies.
cmbyrd77

cmbyrd77

Structural
Joined
Aug 4, 2010
Messages
79
Location
US
Is there anyone out there that has a good cast-in-place conc. with metal shell pile specification out there that they would be willing to share? I was surprised to see that Masterspec doesn't have a section.
 
Sort by date Sort by votes
Section 31 60 00 of MasterFormat 2012 is for Driven Piles
 
Upvote 0 Downvote
What type of pile? Is this a micropile?

Dik
 
Upvote 0 Downvote
The spec. I'm looking for would be 316223 COMPOSITE PILES in the 6-digit format. For this particular project they are using the 5-digit format, but I will just need to adjust the number to 02456 CONCRETE-FILLED STEEL PILES.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Question Question
Lateral Loaded Pile with Pile Cap & Slab-on-ground
Replies
16
Views
10K
Retrograde
Retrograde
mferg318
  • Question Question
Impact of Abandoned Pile on Pile Group Behavior
Replies
9
Views
9K
mferg318
mferg318
Lytnur
  • Question Question
3 pile, pile cap
Replies
16
Views
6K
KootK
KootK
Steel Inspector
  • Question Question
Pile longitudinal rebar twisted during fabrication
Replies
17
Views
6K
BAretired
BAretired
Baffled Engineer
  • Locked
  • Question Question
Tension Pile Detailing
Replies
6
Views
7K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top