Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pile load test

Status
Not open for further replies.
PSlem

PSlem

Geotechnical
Joined
Oct 5, 2003
Messages
340
Location
US
The 2003 IBC lists three types of evaluation to determine pile failure. The third is Chin-Konder Extrapolation. I could not find any info with an internet search. Does anyone know how this test measures failure?

Engineering is the art of not constructing...of doing that well with one dollar what any bungler can do well with two after a fashion.
 
Sort by date Sort by votes
I found it. I had a misspelling. Chin Kondner. Similar to Hansen.

Engineering is the art of not constructing...of doing that well with one dollar what any bungler can do well with two after a fashion.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DirtSmuggler
  • Question Question
Static Load Test
Replies
4
Views
5K
EireChch
EireChch
W
  • Question Question
The minimum number of piles required for static load test
Replies
6
Views
10K
wangqian
W
jochav52802
  • Question Question
Pile-to-Pile Cap Lateral Shear Breakout Calculation
Replies
3
Views
656
HTURKAK
HTURKAK
pelelo
  • Question Question
Auger cast pile with no rebars
Replies
8
Views
8K
dik
dik
Boiler106
  • Question Question
Augercast Pile Minimum Diameter for stability
Replies
4
Views
3K
ANE91
ANE91

Part and Inventory Search

Sponsor

Back
Top