Sep 23, 2002 #1 cbosy Geotechnical Jun 26, 2003 72 Has anybody heard of any method to predict pile capacity using a vibratory hammer?
Sep 23, 2002 #2 gibbycu Geotechnical Sep 11, 2002 17 Someone in my firm just published a paper with DFI on determining pile capacity from rapid load tests. If this is what you are looking for then I could try to get you the info. Upvote 0 Downvote
Someone in my firm just published a paper with DFI on determining pile capacity from rapid load tests. If this is what you are looking for then I could try to get you the info.
Sep 25, 2002 #3 DRC1 Civil/Environmental Jan 26, 2002 1,328 I believe GRL was doing some reserch on the subject to develop a program similar to WEAP. You may want to check with them (http://www.pile.com). Also Bowles listed some formulas in his book "Foundation Analysis & Design" but I beleive he cautions that they are approximate at best. Upvote 0 Downvote
I believe GRL was doing some reserch on the subject to develop a program similar to WEAP. You may want to check with them (http://www.pile.com). Also Bowles listed some formulas in his book "Foundation Analysis & Design" but I beleive he cautions that they are approximate at best.
