Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PILC/SWA/PVC

Status
Not open for further replies.
Ahr35181

Ahr35181

Electrical
Joined
Sep 8, 2003
Messages
80
Location
GB
Where PILC/SWA/PVC is used on 11KV distribution, is the cpc the lead & armour combined?

Thanks in advance,

Alan
 
Sort by date Sort by votes
The CPC for calculation purposes would be (i believe) the lead as the armour at the termination points is usually only tied to the connection cone were the lead is soldered.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

YungPlantEng
  • Locked
  • Question Question
Relocating live pvc conduit
Replies
3
Views
335
YungPlantEng
YungPlantEng
tofulover
  • Locked
  • Question Question
Operating temperature of PVC conduit for X90 and X110 rated XLPE cables
Replies
3
Views
636
tofulover
tofulover
sparky_007
  • Locked
  • Question Question
Teck90 Outer PVC Jacket Removed??
Replies
1
Views
325
waross
waross
EddyWirbelstrom
  • Locked
  • Question Question
Joining z MV 3c, Cu screened cable with SWA to a MV 3c, Cu screened cable without SWA
Replies
2
Views
120
EddyWirbelstrom
EddyWirbelstrom
electrical429
  • Locked
  • Question Question
Is there a good tutorial on transformer vector group change using cable phase swap and rollover?
Replies
5
Views
1K
mvcjr
mvcjr

Part and Inventory Search

Sponsor

Back
Top