Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
pid three position output algorithm
- Thread starter biobio
- Start date
If it is not a homework problem, I think the Electric Motor Controls forum is not necessarilly the right place to ask. I would try the PLC or Control Systems forums, those folks deal with the propeller-head stuff more than we do.
If it is a homework problem, get a life and buck-up like the rest of us did.
"Venditori de oleum-vipera non vigere excordis populi"
If it is a homework problem, get a life and buck-up like the rest of us did.
"Venditori de oleum-vipera non vigere excordis populi"
I can't give you an algorithm but the idea is
Output above setpoint-drive full negative
Output within a band around setpoint-do nothing
Output below setpoint-drive full positive.
A real world example-heating and air conditioning control.
Temperature about correct-no heat or air.
Temp too high-turn on the air.
Temp too low-turn on the heat.
Output above setpoint-drive full negative
Output within a band around setpoint-do nothing
Output below setpoint-drive full positive.
A real world example-heating and air conditioning control.
Temperature about correct-no heat or air.
Temp too high-turn on the air.
Temp too low-turn on the heat.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question