philips drive dimensions 1

[grunt58]

Im looking for philips drive dimensions for a M1.6 and pan head screw. It says it's a #0 is that the same as an inch #0?

Certified SolidWorks Associate
SW2009 X64 SP 1.0
Dell Precision T5400
Nvidia Quadro FX 5600
Xeon 2.5GHz Quad Core, 4GB RAM
XP Pro X64 SP2.0

 

[MikeHalloran]

It should be the same, unless I missed a meeting.



Mike Halloran
Pembroke Pines, FL, USA

 

[KENAT]

Do you want to know the size of the actual driver or of the drive in the screw?

The releven ISO or similar should have the info for the screw itself.

http://www.commandoproducts.com/charts.htm

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[grunt58]

Kenat not sure what you are asking. It's a #0 size philips drive in the screw. I would assume it's the same as an inch #0 since there is no designation saying it's a "#0 metric" drive.

Certified SolidWorks Associate
SW2009 X64 SP 1.0
Dell Precision T5400
Nvidia Quadro FX 5600
Xeon 2.5GHz Quad Core, 4GB RAM
XP Pro X64 SP2.0

 

[CoryPad]

ISO 7045 Pan head screws with type H or type Z Cross recess - Product grade A specifies a Recess No. 0 for an M1.6 screw. For this drive size, the recess width is 1.6 mm ref for a Type Z and 1.7 mm ref for a Type H, and the penetration is 0.65 mm to 0.90 mm for Type Z and 0.70 mm to 0.95 mm for a Type H.