CharlesAlbert
Mechanical
- Jan 19, 2005
- 2
I have a client who generates waste water from an aluminum die casting operation. The EPA limits onphenol in the wastewater discharge are VERY VERY low.
We are trying to find a commercially available process for essentailly total destruction of the PHENOL from streams that contain original levels of 1-9 ppm phenol but must reduce to close to "ND".
Chuck
chuck798081@aol.com
We are trying to find a commercially available process for essentailly total destruction of the PHENOL from streams that contain original levels of 1-9 ppm phenol but must reduce to close to "ND".
Chuck
chuck798081@aol.com