Phantom Datum Extensions

[felix7502]

Our extension lines and the right side of the gtol box are showing up as thick Phantom lines. We've been struggling with this since we moved from 2008. We're on 2009 SP2.1 (ANSI). All our settings seemed to have remained as they were. Any help? Thanks, Sylvia

 

[Eltron]

Have you noticed any other graphics anomalies?

Dan

http://www.eltronresearch.com

Dan's Blog

 

[felix7502]

Nothing that we haven't found a work around for. This just started with 2009. Sylvia

 

[CorBlimeyLimey]

Did you update the graphics driver properly after ugrading to SW09?

 

[felix7502]

I'll check with I.T.. Why would this be the only thing affected? Sylvia

 

[CorBlimeyLimey]

Graphics drivers are strange animals they can affect one simple graphics element or SW to the point of not being able to run.

 

[Eltron]

I can attest to both.

Dan

http://www.eltronresearch.com

Dan's Blog

 

[IRstuff]

You might also try disabling graphics accelerations of various sorts in the graphics card and see if that makes a difference.

TTFN

FAQ731-376

 

[fcsuper]

It used to surprize me just how often graphics card related issues cause problems in software.

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group