I work with indirect fire heaters in which SA106B piping is exposed to a steam bath. The ph level in the fliud which is a 50/50 mix of dowthernm and distilled water is rising. Does anybody know if the external coatings of SA106B piping contains any chemical that may cause this. It is the only part that is not sandblasted clean prior to final assembly.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
PH Levels
- Thread starter NEWF2003
- Start date
- Status
Similar threads
