Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

PG thread

Status
Not open for further replies.
cubalibre000

cubalibre000

Mechanical
Joined
Jan 27, 2006
Messages
1,070
Location
IT
Hi,
someone has a list of PG thread to add to the thd_metric.dat because the thread is on outside cylinder pg press cable face.

Thank you...

Using NX 8 and PDM RuleDesigner
 
Status
Not open for further replies.

Similar threads

Ram K
  • Locked
  • Question Question
Thread callout in Drawing
Replies
1
Views
898
Toost
Toost
MANox
  • Locked
  • Question Question
Number of holes in Hole and thread callout
Replies
0
Views
1K
MANox
MANox
jtozer
  • Locked
  • Question Question
NX2206 Custom Journal Breaks Hole and Thread Callout
Replies
2
Views
428
jtozer
jtozer
Befuddled
  • Locked
  • Question Question
Part Families - Threads (symbolic . Detailed)
Replies
2
Views
1K
Toost
Toost
prok20081
  • Locked
  • Question Question
Outputting Thread Data to a Windows Form
Replies
1
Views
152
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top